Photo to follow
Boutique gallery — Al Quoz
Al Quoz, Dubai · 2023
Polished concrete + Ultratop SL, 480 m²
Loading
Decorative Concrete · Polished · Stamped · Exposed Aggregate
Polished concrete floor with a near-mirror gloss. Stamped concrete that reads as natural stone. Exposed aggregate driveways. We design, pour, hone and seal — for the architectural look concrete delivers better than any tile imitation.
Approved applicator · brand-certified
What we do
Polished concrete, stamped concrete, exposed-aggregate, colour-hardened — these are no longer industrial finishes. They're the surface luxury hospitality and commercial projects are calling for.
We apply Mapei Ultratop SL for designed self-levelling concrete topping, hone existing slabs to a polished finish, and seal everything with UV-stable PU or wax-emulsion penetrating sealer.
Pick a finish
Each finish is built differently. Click through to see the spec, the look and where we'd use it.
Select application
Recommended system
MAPEI
Ultratop SL + densifier
Ground 50 → 3000 grit
Indicative spec
Send us a mood-board image — we'll mock up a sample tile on a 30 × 30 cm board before site mobilisation.
Our process
Where it fits
Reference projects
Boutique gallery — Al Quoz
Al Quoz, Dubai · 2023
Polished concrete + Ultratop SL, 480 m²
Restaurant — DIFC
DIFC, Dubai · 2024
Stamped concrete floor in heritage stone pattern
Villa driveway — Emirates Hills
Emirates Hills · 2023
Exposed aggregate driveway
Frequently asked
Polished concrete grinds and polishes the existing structural slab (or a new pour) — you're seeing the actual concrete. Microtopping is a 3 mm overlay applied on top of a substrate (which could be tile, screed, or anything else) — it's a finish, not the slab. Different spec, different look, different cost.
Yes if the slab is sound. We core-sample to check density and aggregate distribution, and only proceed if the slab will polish predictably. Older slabs with surface laitance need an Ultratop SL topping coat first.
Hairline shrinkage cracks happen on any concrete pour. We control them with steel mesh reinforcement, day-joint planning and wet-curing under fleece. Structural cracks are different — those come from substrate movement and need engineering input first.
We seal with UV-stable PU sealer (not generic acrylic). Indoor polished concrete is unaffected by UV. Outdoor decorative concrete (driveways, patios) needs the UV-stable sealer reapplied every 3–5 years.
R9 polished, R10 honed (lower-grit endpoint). For wet zones we honed-finish at 400 grit instead of polishing to 3000. Anti-slip additive can be added to the topcoat without dulling the polish too much.
Routine: pH-neutral cleaner, microfibre mop. Periodic: re-coat the sealer every 3–5 years. We do this as a maintenance visit — no need to re-grind unless the floor has been heavily abused.
Polished concrete is grey-on-grey (the natural slab colour with the aggregate revealed). Coloured polished concrete uses pigmented Ultratop SL — we can mix to a sample. Stamped concrete uses colour-hardener — a wide palette of earth tones, terracotta, slate, sand.
Indicative ranges only — quoted after survey. Polish existing slab: AED 180–280 / m². Polished Ultratop SL topping: AED 320–480 / m². Stamped concrete: AED 280–420 / m². Exposed aggregate: AED 220–360 / m². Add for difficult access, mock-ups, and bespoke colour matching.
Free site survey across Dubai, Abu Dhabi and Sharjah. Written quotation back within 48 working hours — sample tile on request.
Brand-certified applicator